Construction vehicles such as cranes, tractors, bulldozers, and more have tough windshields that are custom-fit to the equipment. These windshields experience adverse conditions constantly, but that does not mean they are infallible. If you're a construction site manager and a window or windshield on your equipment sustains a crack or chip, you've got to get it fixed immediately. If you let the damage linger, it could quickly grow worse and create a massive problem.

Excessive Vibrations Speed up Damage

Heavy equipment experiences more and stronger vibrations than your average car. These vibrations can make a small chip quickly expand into a windshield-spanning crack, or cause a divot to send longer cracks radiating out across much of the windshield. Heavy equipment tends to use laminated or tempered glass, just like car windshields, but the conditions in which the equipment operates are much more intense. You can't simply wait and see if the damage is going to get worse like you can do sometimes with a regular car.

Close Quarters Bring Increased Risk of Harm

Heavy equipment often has very large panes of glass surrounding a small operator cab. So the drivers of these vehicles face more glass up closer than the average car driver. If a crack in the windshield suddenly expands and causes the glass to shatter, the operator faces a bigger risk of injury, especially in cranes that may be subject to high winds. It's difficult for the operator to get out quickly, especially from a crane cab. Fixing damage or replacing windshields immediately helps avoid this risk.

Cracks Reduce Visibility

Even if you decide to take a risk and wait, those cracks, chips, web-like radiations and more all block the operator's view of at least part of the construction site. If an operator has to keep shifting his view to see past a crack, that delays work (all those seconds do add up) and makes it more likely that the operator will miss spotting something wrong at the site. You don't need that extra blockage, even of right now it looks like a tiny blemish on the windshield.

Windshields for heavy equipment are usually installed onsite, so you don't have to worry about transporting the equipment to a workshop. Windshield and glass companies will come out and measure the windshield to ensure a custom fit, and they'll also inspect the frame where the glass will go to ensure the windshield stays put once it's been installed. For more information, you can find more info here, or on similar sites.

Share